Contributors Guide¶
General Guidelines¶
Contributing¶
- Own your pull requests; you are their advocate.
- If a request goes unreviewed for two or three days, ping a reviewer to see what’s holding things up.
- Follow up on open pull requests and respond to any comments or questions a reviewer might have.
- Keep the contents of the pull request focused on one idea. Smaller pull requests are easier to review, and thus will be merged in more quickly.
- After submitting a request, be ready to work closely with a reviewer to get it tested and integrated into the overall test suite.
- Follow the Code Style guidelines to make your pull request as easy to review as possible.
- If your request requires the use of private information that can’t be represented in the data file templates (probably cfme_data.yaml), please state that in the test module docstring or the individual test docstring, along with information on where that data can be found.
- Similar to the last point, any data files used by a test module should be clearly documented in that module’s docstring.
- Any data required in a sensitive data file should be reflected in the template for that file.
- Standards may change over time, so copying older code with similar functionality may not be the most productive action. If in doubt, refer back to this document and update the copied code according to the current guidelines.
- Please keep large lint changes separate from new features, though this point should become less relevant over time.
- All pull requests should be squashed down to logical blocks of distinctive
functionality that work by themselves and do not result in brokenness of master
- As an example, if you were working on a test which required new pages, utilities and tests, it would be OK to split the page, utility and test changes into separate requests or commits, providing they were in the correct order of dependency.
Reviewers¶
Reviewers will be looking to make sure that the Contributing guidelines are being met. Some of the things that go into the review process:
- Assign the PR to the reviewer
- Pull request branches will be rebased against current master before testing.
- Newly added tests will be run against a clean appliance.
- Adherence to code style guidelines will be checked.
If tests fail, reviewers WILL:
- ...give you a complete traceback of the error.
- ...give you useful information about the appliance against which tests were run, such as the appliance version.
- ...give you insight into any related data files used.
If tests fail, reviewers WILL NOT:
- ...thoroughly debug the failing test(s).
All requests require 2 approvals from two reviewers, after which time, the contributor may, permissions allowing, merge the commit him/herself.
Reviewers must never approve their own pull requests.
Release Candidates and Tagging¶
The MIQ/integration_tests maintainers will use a two week release schedule, with a release candidate (RC) commit tagged on the last Friday in the cycle. When this RC tag is set, new PRs are not accepted for merging unless fixing things that were broken in the current release cycle. This 2-3 day period is commonly called the ‘dev-freeze’.
Release tags will be created on the following Tuesday, and the downstream-stable branch updated to the release tag commit.
Releases are tagged with a version number in the format \d+\.\d+\.\d+
,
for example 17.25.0
.
The release candidate commits will be tagged on Friday with a downstream-stable-rc
tag,
and a version numbered tag that will match the version number of the next release.
For example, the Friday before 17.25.0
is released we create an RC tag 17.25.0-rc
.
This means we have a tag, downstream-stable-rc
that moves each time an RC commit is selected,
and a 2nd tag pointing to the same commit with a -rc
suffix.
This process breaks down to something like the following. This example is for release 18.30.0
- On Friday, reviewers feverishly merge any PRs that have passed review and have good PRT results.
- Once all merge-able PRs have been considered, a
master
branch commit is selected for RC. - For this example, the commit is
abcde1234
- A Maintainer creates
18.30.0-rc
tag, and force updatesdownstream-stable-rc
tag - Both tags point to
abcde1234
- We are now in dev-freeze, and no PRs will be merged until release (exception below)
- RC test jobs start, using the
downstream-stable-rc
tag as their git ref. - Everyone has a great weekend and the RC jobs run a full test run against all providers
- Monday/Tuesday, test results are analyzed
- PRs are opened against any new failures, labeled with
rc-regression-fix
rc-regression-fix
PRs are reviewed, tested, and merged (exception for dev-freeze)- Tuesday, a
master
branch commit is selected for release,abcde1235
- The
18.30.0
tag is created - The
downstream-stable
branch is updated (fast-forward) - Both
downstream-stable
branch and18.30.0
point to commitabcde1235
- Release email sent with changelist of the included PRs
- ‘dev-freeze’ is over, and PRs can now be merged at-will into
master
Code Style¶
We adhere to Python’s PEP 8 style guide , occasionally allowing exceptions for the sake of readability. This is covered in the Foolish Consistency section of PEP 8. Information on using linting tools to help with this can be found on the flake8 page.
We also do a few things that aren’t explicitly called out in PEP 8:
The github pull request pane is our primary code review medium, and has a minimum width of 100 characters. As a result, our maximum line length is 100 characters, rather than 80.
Use parentheses
()
for line continuation:# in imports import (module1, module2, module3, module4, module5) or import ( module1, module2, module3, module4) or import ( module1, module2, module3 ) # in long strings without multiple lines very_long_string = ( "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt " "ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation " "ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in " "reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur " "sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id " "est laborum." )
Docstrings can be used in strings with multiple lines:
string_with_multiple_lines = """Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation"""
When wrapping blocks of long lines, indent the trailing lines once, instead of indenting to the opening bracket. This helps when there are large blocks of long lines, to preserve some readability:
_really_really_long_locator_name = (True, ('div > tr > td > a[title="this ' 'is just a little too long"]')) _another_really_super_long_locator_name = (True, ('div > tr > td > ' 'a[title="this is getting silly now"]'))
When wrapping long conditionals, indent trailing lines twice, just like with function names and any other block statement (they usually end with colons):
if (this_extremely_long_variable_name_takes_up_the_whole_line and you_need_to_wrap_your_conditional_to_the_next_line): # Two indents help clearly separate the wrapped conditional # from the following code.
When indenting a wrapping sequence, one indent will do. Don’t try to align all of the sequence items at an arbitrary column:
a_good_list = [ 'item1', 'item2', 'item3' ] a_less_good_list = [ 'item1', 'item2', 'item3' ]
According to PEP 8, triple-quoted docstrings use double quotes. To help differentiate docstrings from normal multi-line strings, consider using single-quotes in the latter case:
"""This is a docstring. It follows PEP 8's docstring guidelines. """ paragraph = '''This is a triple-quoted string, with newlines captured. PEP 8 and PEP 257 guidelines don't apply to this. Using single quotes here makes it simple for a reviewer to know that docstring style doesn't apply to this text block.'''
On the subject of docstrings (as well as comments) +++use them+++. Python is somewhat self-documenting, so use docstrings and comments as a way to explain not just what code is doing, but why it’s doing what it is, and what it’s intended to achieve.
We have decided to use the following docstring format and use the Cartouche Sphinx plugin to generate nice docs. Details on the format can be found above, but an example is described below:
def my_function(self, locator): """Runs the super cool function on a locator Seriously, you have to try this Note: You don't actually have to try it Args: locator: The name of a locator that can be described by using multiple lines. Returns: Nothing at all. Raises: CertainQuestionsError: Raises certain questions about the authors sanity. """
In addition to being broken up into the three sections of standard library, third-party, and the local application, imports should be sorted alphabetically. ‘import’ lines within those sections still come before ‘from ... import’ lines:
import sys from os import environ from random import choice
We require
print
statements be written in Python 3.0 compatible format, that is encased in parentheses:print("Hello")
We also use the newer
.format
style for string formatting and will no longer be accepting the older%s
format. The new format offers many more enhancements:a = "new" b = 2 "a {} string for {}".format(a, b) "{name} is {emotion}".format(name="john", emotion="happy") "{0} and another {0}".format("something")
There is a one exception for string formatting. According https://docs.python.org/3/howto/logging.html#optimization use old style
%s
, but without the actual%
formatting operation:from cfme.utils.log import logger logger.info("Some message %s", some_string)
General Notes¶
- Avoid using
time.sleep()
as much as possible to workaround quirks in the UI. There is acfme.utils.wait.wait_for()
utility that can be used to wait for arbitrary conditions. In most cases there is some DOM visible change on the page which can be waited for. - Avoid using
time.sleep()
for waiting for changes to happen outside of the UI. Consider using tools like mgmt_system to probe the external systems for conditions for example and tie it in with acfme.utils.wait.wait_for()
as discussed above. - If you feel icky about something you’ve written but don’t know how to make it better, ask someone. It’s better to have it fixed before submitting it as a pull request ;)
- Use
six
library to write Python 3 compatible code.
Other useful code style guidelines:
UI modeling¶
For a guide on how to model the UI representation in our framework, please see UI modeling.
Layout¶
cfme_tests/
cfme/
Page modeling and testsfixtures/
The new fixturestests/
Tests containerutils/
Utility functions that can be called inside our outside the test context. Generally, util functions benefit from having a related test fixture that exposes the utility to the tests. Modules in this directory will be auto loaded.tests/
Unit tests for utils
conf/
Place for configuration filesdata/
Test data. The structure of this directory should match the structure undercfme/tests/
, with data files for tests in the same relative location as the test itself.- For example, data files for
cfme/tests/dashboard/test_widgets.py
could go intodata/dashboard/test_widgets/
.
- For example, data files for
fixtures/
py.test fixtures that can be used by any test. Modules in this directory will be auto loaded.markers/
py.test markers that can be used by any test. Modules in this directory will be auto loaded.cfme/metaplugins/
Plugins loaded by@pytest.mark.meta
. Further informations inmarkers.meta
scripts/
Useful scripts for QE developers that aren’t used during a test runsprout/
Here lives the Sprout appliance tool.
Writing Tests¶
Tests in cfme_tests have the following properties:
- They pass on a freshly deployed appliance with no configuration beyond the defaults (i.e. tests do their own setup and teardown).
- Where possible, they strive to be idempotent to facilitate repeated testing and debugging of failing tests. (Repeatable is Reportable)
- Where possible, they try to clean up behind themselves. This not only helps with idempotency, but testing all of the CRUD interactions helps to make a thorough test.
- Tests should be thoroughly distrustful of the appliance, and measure an
action’s success in as many ways as possible. A practical example:
- Do not trust flash messages, as they sometimes tell lies (or at least appear to). If you can go beyond a flash message to verify a test action, do so.
Some points when writing tests:
- When naming a test, do not use a common part of multiple test names as a test
name itself. In the example below, trying to run a single test called
test_provider_add
, not only runs that test, but alsotest_provider_add_new
andtest_provider_add_delete
, as pytest uses string matching for test names.test_provider_add
should have a suffix making it unique. In this way a tester can choose the run just the single test on its own, or the group of tests, whose names all begin the same way.- test_provider_add - Adds a provider (Bad naming)
- test_provider_add_new - Adds a new provider type
- test_provider_add_delete - Adds a provider and then deletes it
- Where a clean-up is required, it should be carried out in a Finalizer. In this way we prevent leaving an appliance dirty if the test fails as the clean up will happen regardless.
- Keep all properties, fixtures and functions together
Fixtures¶
Fixtures are not only responsible for setting up tests, but also cleaning up after a test run, whether that test run succeeded or failed. addfinalizer is very powerful. finalizer functions are called even if tests fail.
When writing fixtures, consider how useful they might be for the overall project, and place them accordingly. Putting fixtures into a test module is rarely the best solution. Instead, try to put them in the nearest conftest.py. If they’re generic/useful enough consider putting them into one of the fixtures/ directory for use in cfme_tests or the plugin/ directory for use in both projects.
This Document¶
This page is subject to change as our needs and policies evolve. Suggestions are always welcome.